Table of Contents
Advertisement
DS3 Uplink
SCP cards with a DS3 uplink have two BNC jacks: one for the transmit direction
and one for the receive direction. To cable an SCP card with an DS3 uplink:
8400-A2-GZ40-10
1. Connect the input cable to the RX jack on the faceplate of the SCP card.
2. Connect the output cable to the TX jack on the faceplate of the SCP card.
3. If the chassis is mounted in a rack, direct the cables toward the nearest rail
and fasten them with cable ties.
T X
R X
S 3
P - D
S C
1 1
8 4
03-17463
October 2003
5
Advertisement
Table of Contents
