Mail Settings - Christie DWU951 User Manual

3. Web Control
3.1 Projector Web Control

3.1.5 Mail Settings

Item
Send Mail
SMTP Server Address
Sender E-mail address
Recipient E-mail address
Send Test Mail
Click the [Apply] button to save the settings.
Mail settings are initialized when clicking the [Reset] button.
NOTE
• You can confirm whether the mail settings work correctly by using the
[Send Test Mail] button. Enable Send Mail setting before clicking the [Send
Test Mail].
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
DWU951/DWX951/DXG1051 User's Manual - Network Guide
Displays and configures e-mail addressing
settings.
Click the [Enable] check box to use the e-mail function.
Configure the conditions for sending e-mail under the Alert
Settings.
Configures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Configures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Configures the e-mail address of up to five recipients. You
can also specify the [to] or [cc] for each address. The
length of the recipient e-mail address can be up to 255
alphanumeric characters.
Sends a test e-mail to the set address.
46
Description
020-000662-01 Rev. 1 (01-2014)