Controlling How Copies Will Look - HP C5370A User Manual

3
If you are making more than one copy, press the Plus ( + ) button
or the Number of Copies button followed by the Plus (+) button
until the appropriate number is displayed on the front panel.
4
Adjust the way your copy will look using the Copy Quality,
Reduce/Enlarge, Lighter/Darker, and Color Intensity buttons.
See "Controlling How Copies Will Look" later in this chapter for
details.
5
Start copying:

Controlling How Copies Will Look

You can change default copy settings to produce copies that look the
way you want them to.
NOTE There is a small margin around the edge of paper that the HP Color Copier
cannot copy onto. See "Copy Margins" on page 9-1 for more information.
This section explains how to use the following settings and options:
Number of copies
Copy quality
Reduce/enlarge features
Paper types
Lighter/darker
Color intensity
Text enhancement (TE)
Enhance light colors (ELC)
Copy paper size
Set defaults
NOTE The copy settings are reset to their default settings two minutes after each
copy job is complete.
TIP
If you consistently use front panel settings other than the default,
consider establishing those settings as your new "defaults." See
"Set Defaults" on page 3-9 for more information.
Press the Black button to make a black and white copy.
Press the Color button to make a color copy.
HP Color Copier User's Guide 3-3