Table of Contents
Advertisement
If you accept an incoming call, the room
monitor is suspended for the duration of the
call, but the function remains activated.
If you deactivate then reactivate the hand-
set, the room monitor remains activated.
Caution!
u Always check the operation of the
room monitor before use. For exam-
ple, test its sensitivity. Check the
connection if you are diverting the
room monitor to an external
number.
u When the function is switched on, the
handset's operating time is considera-
bly reduced. If necessary, place the
handset in the base/charger. This
ensures that the battery does not run
down.
u Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
v ¤ É ¤ Room Monitor
¤ You can enter data in the following fields:
Activation:
Select On to activate.
Alarm to:
Select Internal or External.
External number: Select the number
from the directory (press display key
or enter it manually.
Internal number: Press the display key
¤ select handset or Call All to call
§Change§
all registered handsets ¤
In idle status, the destination number or
the internal destination number is dis-
played.
ö
)
§OK§
.
Using a handset as a room monitor
Two Way Talk:
Switch the handset's speaker on or off
(select On oder Off).
Sensitivity:
Select noise level sensitivity (Low or
High).
¤ Press
§Save§
to save the settings.
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i
V
07:15
Á
INT 1
22 Oct
Room Monitor
0891234567
OFF
Options
Changing the set destination
number
v ¤ É ¤ Room Monitor
¤ Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
(¢ page 63).
Cancelling/deactivating the room
monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key
deactivate room monitor mode.
§OFF§
to
63
Advertisement
Table of Contents
