Connecting the headset
Connecting the USB data cable
You can connect a standard USB data cable with a mini-B connector to the back of
your handset to connect the handset to a PC (¢ page 86).
¤ Remove the belt clip (if attached)
(¢ page 11).
¤ Remove the battery cover (¢ page 10).
¤ Connect the USB data cable to
USB socket
Please note
Please connect your handset directly
to the PC; do not connect via a
USB hub.
After removing the plastic cover, you can connect a head-
set to the left-hand side of your handset with the 2.5 mm
jack connector.
See the relevant product page at www.gigaset.com for
information on recommended headsets.
The headset volume corresponds to the settings for the
handset volume (¢ page 69).
After using the headset, replace the plastic cover to enable
optimum sound in handsfree mode.
1
.
Connecting the headset
1
21