2.14
ATX Power Connector (EATXPWR1, ATX12V1)
This connector is for an ATX Micro-Fit power supply. The plugs from the power sup-
ply are designed to fit these connectors in only one direction. Determine the proper
orientation and push down firmly until the connectors mate completely.
Note!
1.
2.
AIMB-273 User Manual
Please do connect the ATX12V1 connector with the PSU ATX 12V
4-pin connector.
For a fully configured system, we recommend that you use a power
supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or
later version) and provides a minimum power of 180 W.
24