HP ProLiant DL360 Quickspecs page 37

QuickSpecs
Additional Options
HP Rack Series HP Rack Series HP Rack Series HP Rack Series
HP Rack Options HP Rack Options HP Rack Options HP Rack Options
HP Rack 10000 G2 Series (Carbon/Graphite Metallic) HP Rack 10000 G2 Series HP Rack 10000 G2 Series HP Rack 10000 G2 Series
HP 10642 G2 Pallet Universal Rack
HP 10642 G2 Shock Universal Rack
HP 10642 G2 1200mm deep Shock Rack
HP 10647 G2 1200mm deep Shock Rack
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment NOTE: NOTE: NOTE:
installed.
NOTE: Please see the QuickSpecs for additional information: NOTE: NOTE: NOTE:
http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html
NOTE: NOTE: NOTE: NOTE: For additional information regarding Rack Cabinets and Telco Rack support,
please see the following URL: http://www.hp.com/go/rackandpower.
NOTE: NOTE: NOTE: The increasing power of new high-performance processor technology requires NOTE:
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully
loaded with servers using the latest processors.
CAUTION: CAUTION: If a third-party rack is used, observe the following additional requirements CAUTION: CAUTION:
to ensure adequate airflow and to prevent damage to the equipment: Front and rear
doors: If your 42U server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open area for
ventilation). Side: The clearance between the installed rack component and the side
panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: CAUTION: CAUTION: Always use blanking panels to fill all remaining empty front panel U- CAUTION:
spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
NOTE: Quick deploy rail system provides tool-free support for racks with square or NOTE: NOTE: NOTE:
round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP
series), with an adjustment range of 24" - 36". The ambidextrous cable management
arm can be mounted on either the left or right side for improved cable management.
HP USB Keyboard and Mouse HP USB Keyboard and Mouse HP USB Keyboard and Mouse HP USB Keyboard and Mouse
HP USB BFR with PVC Free Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional NOTE: NOTE: NOTE:
information:
http://h18000.www1.hp.com/products/quickspecs/13972_na/13972_na.html
HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard TAA Monitor
NOTE: Please see the QuickSpecs for Technical Specifications and additional NOTE: NOTE: NOTE:
information:
http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
HP Server Console Switches HP Server Console Switches HP Server Console Switches HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
DA - 13598 North America — Version 40 — October 10, 2011
HP ProLiant DL360 Generation 7 (G7) HP ProLiant DL360 Generation 7 (G7) HP ProLiant DL360 Generation 7 (G7) HP ProLiant DL360 Generation 7 (G7)
AF001A
AF002A
AF092A
AF094A
631341-B21
AZ870A
AZ885A
AF616A
AF617A
Page 37