Technical Specifications - HP ProLiant DL360 Quickspecs

QuickSpecs

Technical Specifications

System Unit System Unit System Unit System Unit Dimensions (H x W x D) Dimensions Dimensions Dimensions
(with bezel)
Weight Weight Weight Weight
(approximate)
Input Requirements Input Requirements Input Requirements Input Requirements
(for Standard 460W PSU,
see power specifications
tables for detail on 460W,
750W and 1200W power
supplies)
BTU Rating BTU Rating BTU Rating BTU Rating
Power Specifications Power Specifications Power Specifications Power Specifications
Power Supply Output Power Supply Output Power Supply Output Power Supply Output
(per power supply)
System Inlet Temperature System Inlet Temperature System Inlet Temperature Operating System Inlet Temperature
Relative Humidity Relative Humidity
Relative Humidity Relative Humidity
(non-condensing)
DA - 13598 North America — Version 40 — October 10, 2011
1.70 x 16.78 x 27.25 in (4.32 x 42.62 x 69.22 cm)
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Maximum
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at URL:
energy-efficient or www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL360 G7
- Follow the instructions of the next screens.
Rated Steady-State Power 460 W (at 100 VAC),
Maximum Peak Power
Non-operating
Operating
HP ProLiant DL360 Generation 7 (G7) HP ProLiant DL360 Generation 7 (G7) HP ProLiant DL360 Generation 7 (G7) HP ProLiant DL360 Generation 7 (G7)
39.5 lb (17.92 kg)
32 lb (14.51 kg)
100 to 240 VAC
4.5 Amps (at 120VAC) to 2.2 Amps (at 240
VAC)
50 to 60 Hz
1773 BTU / hr (at 120 VAC), 1715 (at 240
VAC)
www.hp.com/go/proliant-
460 W (at 200 VAC)
460 W (at 100 VAC),
460 W (at 200 VAC)
NOTE: NOTE: NOTE: NOTE: See Power Supply Specifications tables
for complete details on 460W PSU and optional
750W and 1200W Power Supply Options.
10° to 35° C (50° to 95° F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°
F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10° C/hr (18° F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30° C (86° F).
-30° to 60° C (-22° to 140° F). Maximum rate of
change is 20° C/hr (36° F/hr).
10 to 90% relative humidity (Rh), 28° C (82.4° F)
maximum wet bulb temperature, non-
condensing.
Page 55