Datalogic Jet User Manual page 90

3
Once the Discovery procedure has been completed, select the desired
®
Bluetooth device from the list. It is also possible to digit (12 hexadecimal digits)
the Bluetooth
The "Clear" button deletes all discovered devices from the list.
5. Once the desired Bluetooth
Wizard" button to enter the related window where selecting the connection type
to be used for communication with the Bluetooth
The "Serial Port" button starts communication through the Bluetooth
COM 5 (typically used for connection with GPS devices).
The "Printer" button starts communication with a printer through the Bluetooth
serial port COM 5.
The "Kbd Emulation" button allows connection with a barcode reader using the
keyboard emulation.
The "ActiveSync" button starts communication with a PC equipped with a
®
Bluetooth antenna and the related ActiveSync.
6. Hide the Bluetooth
available on each window or close it through the "Close" button available in the
"Me" window (see step 3 of this procedure).
74
®
address of the desired device by tapping on the "Add" button.
®
device has been selected, tap on the "Connection
®
Manager Device window by tapping on the
DATALOGIC JET™
®
device:
®
serial port
®
icon