Ethernet Settings; Windows Ce Ethernet Cradle - Datalogic Jet User Manual

3
3.8.6

Ethernet Settings

Windows CE Ethernet Cradle

Datalogic Jet™ can be connected to an Ethernet network by inserting it into the
Datalogic Jet™ Ethernet Multi Cradle.
Ethernet communication requires Datalogic Jet™ SW version 5.41 or
later. Verify the software version by tapping on Software – Version in
the Datalogic default home page. Otherwise, search for the file
version.htm under the Windows folder.
NOTE
When correctly inserted into the Ethernet Multi Cradle, the Ethernet driver installed
on the mobile computer will automatically run, and using the DHCP service, will
dynamically assign the IP Address.
1. From the Datalogic Jet™ open Internet Explorer>Internet Options and check use
LAN no autodial then OK.
2. From the Datalogic Jet™ > Explorer, enter the IP address or the PC
name in the address bar. You may be required to enter your network
username and password. The LAN connection will take place and you will
be able to see the PC shared folders and exchange files.
If your network provides Internet Service and does not use a proxy server you can
directly access the Internet. Otherwise set the internet proxy parameters according to
your network settings.
60
DATALOGIC JET™