Watermark - Samsung SCX-812x Series User Manual

1. Press Copy from the display screen.
2. Place a book page face down on the scanner glass (see "Loading
originals" on page 38).
• When you place a book on the scanner glass, leave a little
space (about 10 mm) between the top or bottom edge of the
scanner glass and the book.
• Some books may not be available in this feature such as a
hard-cover book, poorly bound book, etc.
3. Adjust the settings for each copy such as Paper Source, Duplex and
more in the Basic tab (see "Changing the settings for each copy" on
page 52).
4. Press the Advanced tab > Book Copy from the display screen.
5. Press the appropriate option.
• Off: Disables this feature.
• Left Page: Prints only the left page of the book.
• Right Page: Prints only the right page of the book.
• Both Pages(From Left): Prints both facing pages from the left
page.
• Both Pages(From Right): Prints both facing pages from the right
page.
• Book Center & Edge Erase: Erases shadows of a binding or book
edge from the center and side edges of copies.
6. Press Start on the control panel to begin copying.

Watermark

The watermark option allows you to print text over an existing document.
For example, you use it when you want to have large gray letters reading
"DRAFT" or "CONFIDENTIAL" printed diagonally across the first page or all
pages of a document.
This feature may not be available depending on models or option kits
installed.
There are several predefined watermarks that come with the machine. You
can also enter a personalized watermark.
When you use this option, Booklet in the Advanced tab is disabled.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 38).
3. Adjust the settings for each copy such as Paper Source,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 52).
4. Press the Advanced tab > Watermark from the display screen.
5. Press the appropriate option.
• Off: Disables this feature.
• Other preset values: Allows you to easily select values commonly
used.
• Custom: Allows you to enter a text message using the pop-up
keyboard.
6. Set the Watermark settings.
• Pages: Select to print the option on all pages or only the first page.
• Text Color/Size: Select the text message color and size.
• Position: Select the printed position of the text message.
7. Press Start on the control panel to begin copying.
Copying_ 61