Necessary Precautions To Take When Installing Accessories; Available Accessories - Samsung SCX-812x Series User Manual

Necessary precautions to take when installing
accessories
• Disconnect the power cord.
Never remove the control board cover while the power is turned on.
To avoid the possibility of an electrical shock, always disconnect the
power cord when installing or removing ANY internal or external
accessories.
• Discharge static electricity.
The control board and internal accessories (network interface card or
memory module) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, repeat this procedure to discharge any static
electricity again.
• Activating the added accessories in the PS driver properties.
After installing an accessory such as an optional tray, PS driver users
must do the additional setting. Go to the PS printer properties and set
the added accesorry activated.
When installing accessories, the battery inside the machine is a
service component. Do not change it by yourself.
There is a risk of an explosion if battery is replaced by an incorrect
type. Dispose used batteries according to the instructions.

Available accessories

You can purchase and install accessories to enhance your machine's
performance and capacity.
Accessory function
Cabinet Stand You can place the
machine on the
ergonomically-designed
cabinet which lets you
reach the machine
conveniently. Also, you
can easily move the
cabinet with its wheels,
if necessary, and store
miscellaneous items
like papers into the
cabinet.
Dual Cassette If you are experiencing
Feeder frequent Paper Source
problems, you can
attach an additional
tray. The optional tray
can hold up to 1,040
sheets. You can print
documents in various
sizes and types of print
materials in the tray.
300-Sheet Inner This Inner Finisher
Finisher allows you to sort,
group and staple
printouts.
Part name
CLX-DSK20T
CLX-PFP100
CLX-FIN50S
Supplies and accessories_ 161
Accessory function
Working Table You can place an
external authentication
device or
miscellaneous items on
the working table.
Fax Kit This fax kit allows you
to use your machine as
a fax.
FDI(Foreign Device This card is installed
Interface)Kit inside the machine to
allow a third party
device such as a coin
operated device or a
card reader. Those
devices allow the
payfor-print service on
your machine.
Hard Disk Kit This hard disk kit will
help the machine to be
used in various ways.
Job Separator This Job separator will
help the machine to
collate printouts.
Part name
CLX-WKT000
CLX-FAX160
CLX-KIT10F
ML-HDK471
CLX-JST100