Cleaning Paper Dust Stick And Chargers Of Imaging Units - Samsung SCX-812x Series User Manual

Cleaning paper dust stick and chargers of
imaging units
The paper dust stick and the charger of imaging unit will need to be cleaned
after the specified number of pages is printed out. When the message that
tells you to clean the charger appears, you have to clean the paper dust
stick first, then clean the charger. The time when the message appears
depends on environmental factors like altitude, temperature, humidity, and
so on. You need to clean the paper dust stick and the charger to maintain
printing quality. If cleaning is done, the message will disappear
automatically.
Follow the cleaning procedure below.
1. Open the front door.
CLX-92x1 / 93x1 Series
2. Hold the left/right locking levers and push inward at the same time. Then
remove the waste toner container.
CLX-92x1 / 93x1 Series
1
2
3. Pull the paper dust stick out.
CLX-92x1 / 93x1 Series
SCX-812x Series
SCX-812x Series
1
SCX-812x Series
Troubleshooting_ 128
4. Remove the paper dust.
5. Insert the paper dust stick back.
CLX-92x1 / 93x1 Series
6. Pull and push the corresponding charger cleaner completely as shown
below (SCX-812x Series only).
Do not pull the charger cleaner too hard to prevent it from
separating from the machine. It can cause damage to the
machine.
SCX-812x Series
Repeat step.6 five times.
SCX-812x Series