Advanced Tab - Samsung SCX-812x Series User Manual

- Rotate: When printing multiple copies, the printouts are stacked
criss-crossed in sets.
• This feature is available only when the standard or booklet
finisher is not installed.
• This feature is available only with Letter- and A4-sized print
media.
• Before using this feature, you have to load the paper in the
trays with SEF (Short edge feed) and LEF (Long edge
feed). For example, direction of paper feeding in the tray 1
is SEF, and direction of paper feeding in the tray 2 is LEF.
• Staple Options: This option allows you to specify the number of
staples and the staple position. This option is available only when the
optional Inner Finisher is installed.
• Output Tray Options: This option allows you to specify the tray where
to output the printed documents (see "Tray setting" on page 47").

Advanced tab

Use the Advanced tab to set various printing options.
Watermark
see "Using watermarks" on page 108.
Overlay
see "Using overlay" on page 108.
Output options
• Print Order: This options allows you to set the sequence in which
the pages will print. Print Odd Pages and Print Even Pages are
available only when you use the PCL printer driver.
• Skip Blank Pages: This option allows you to specify not to print
blank pages in the original data.
• Manual Margin: This option allows you to specify the binding
margin. Binding margin adjusts the binding position. This option is
not available when you use the PS printer driver.
• PostScript Options: These options are available only when you
use the PS printer driver. Click the question mark (
upper-right corner of the window and click on any option you want to
know about.
If you click Reset, settings in the Advanced option return to the
default setting.
Security
Encrypts printing data first, and transmits it to the machine. This feature
protects the print information even though the data is snatched on a
network. Job Encryption feature is enabled only when the hard drive is
installed. The hard drive is used to decrypt the print data.
Job Accounting
This option allows you to print with the given permission.
• User permission: If you check this option, only users with user
permission can start a print job.
• Group permission: If you check this option, only groups with group
permission can start a print job.
• Click the question mark (
window and click on any option for more information.
• Administrators can enable job accounting and configure
permissions in the control panel or SyncThru™ Web Service.
For detailed information about them, refer to the
Administrator's Guide.
Printing_ 104
) in the
) in the upper-right corner of the