Lcd Operation; Lcd Controls; Display Mode - Thecus N5200B, N5200BR User Manual

8. Finished! Access the N5200 Web Administrator Interface by pressing the
Start Browser button. You can also configure another N5200 at this point
by clicking the Setup Other Device button. Press Exit to exit the wizard.
NOTE

LCD Operation

The N5200 is equipped with an LCD on the front for easy status display and setup.
There are four buttons on the front panel to control the LCD functions.

LCD Controls

Use the Up (▲), Down (▼), Enter (
configuration settings and menu options for N5200 configuration.
The following table illustrates the keys on the front control panel:
LCD Controls
Icon Function
Up Button
▲
Down Button
▼
↵ Enter
ESC Escape
There are two modes of operation for the LCD: Display Mode and Management
Mode.

Display Mode

During normal operation, the LCD will be in Display Mode.
Display Mode
Item
Host Name
WAN
LAN
Link Aggregation
Disk Info
The Thecus Setup Wizard is designed for installation on systems
running Windows XP/2000 or Mac OSX or later. Users with other
operating systems will need to install the Thecus Setup Wizard on a
host machine with one of these operating systems before using the
unit.
↵
) and Escape (ESC) keys to select various
Description
Select the previous configuration settings option.
Select the next configuration settings option.
Enter the selected menu option, sub-menu, or parameter setting.
Escape and return to the previous menu.
Description
Current host name of the system.
Current WAN IP setting.
Current LAN IP setting.
Current Link Aggregation status (N5200B only)
Current status of disk slot has been installed
18