Product Layout - Sitecom WL-350 Full Manual

Product Layout

Item Label
1 LAN Ports
(yellow)
2 WAN Port (blue)
3 DC Connector
4 USB port
5 WPS (on the top
of the router)
Use an Ethernet cable to connect each port to a
computer on your Local Area Network (LAN).
Use an Ethernet cable to connect this port to your
WAN router/modem.
Use the power cable and connect the adapter to the
power socket on the wall, and the DC inlet into the
DC connector.
The USB port can be used to connect a USB memory
stick or hard disk.
WPS (Wireless Push Button) is used for Wi-Fi
Protected Setup. By pressing this button, the
security settings of the device will automatically
synchronize with other wireless devices on your
network that support Wi-Fi Protected Setup.
Description