Special Application - Sitecom WL-350 Full Manual

Special Application

An application rule is used to open single or multiple ports on your router when
the router senses data sent to the Internet on a trigger port or port range. An
application rule applies to all computers on your internal network.
Enable: Place a check in this box to enable the special application rule.
Name: Assign a meaningful name to the virtual server, for example Web
Server. Several well-known types of virtual server are available from the
Application Name drop-down list. Selecting one of these entries fills some of
the remaining parameters with standard values for that type of server.
Triggering Ports: Specify the outgoing port range that is used by the
application.
Firewall Ports: Specify the port range that you would like to open for
Internet traffic.
Schedule: Select a schedule, Always, or Never from the drop-down list. If
a schedule does not exist, you may create it in the Tools > Schedule section.
Click on the Save button to insert the entry into the Special Applications list.