Sitecom WL-350 Full Manual page 48

Specify a policy name and then click on the Next button to continue.
Select a schedule from the drop-down list: Always or Never, or you may
define a new schedule. Click on the Next button to continue.
Select a machine to which the policy applies.
Address Type: Select the IP address or MAC address radio button.
IP Address: If you selected IP address above, then specify the IP address
here.
MAC Address: If you need to change the MAC address of the router's WAN-
side Ethernet interface, either type in an alternate MAC address (for example,
the MAC address of the router initially connected to the ISP) or click on Clone
Your PCs MAC Address.
Click on the OK button to insert the entry into the table.
Click on the Next button to continue.
Select a filtering method:
Log Web Access Only: Select this radio but in order to log web access.
Block All Access: Select this radio but in order to block all web access.
Block Some Access: Select this radio but in order to block some web
access.
Click on the Apply button to store the changes.