Restore To Factory Default; Reboot The Device - Sitecom WL-350 Full Manual

Restore To Factory Default

Click on the Restore all Settings to Factory Defaults button. This option
restores all configuration settings back to the settings that were in effect at the
time when the device was shipped from the factory.
Once the dialog box appears, click on the OK button to confirm the action.
Note: The current settings will be lost.
Click on the OK button to continue. You will then see the Rebooting page.
Please wait while the system is rebooting.
Note: Do no unplug the device during this process as this may cause permanent
damage.

Reboot The Device

Click on the Reboot the Device button to reboot the device using its current
settings. Once the dialog box appears, click on the OK button to confirm the
action.
Once the dialog box appears, click on the OK button to confirm the action.
Note: The current settings will be lost.
Click on the OK button to continue. You will then see the Rebooting page.