Schedule Screen Programming - Lennox ComfortSense 7000 series Homeowner's Manual

Schedule Screen Programming

Days & Events Programming process
Action
1 Press SCHEDULE tab
2 Press EDIT
3 Press NEXT to highlight the de-
sired grouping of days
4 Press an event: WAKE (default),
LEAVE, RETURN, & SLEEP to
select for programming
5 Press UP/DOWN arrows to
select desired temperature
6 Press FAN repeatedly to select
desired fan mode
7 Press UP/DOWN arrows to
adjust start time for
selected event
8 Repeat steps 4 − 7 for all remaining events.
(If you selected other than
MON TUE WED THU FRI SAT SUN
otherwise, skip to step 11.
9 Press NEXT for the next group
or the next day
10 Repeat steps 3 through 8 for the remaining days, if necessary.
11 Press SAVE when all events and
days are programmed as desired
506229−01 05/09
Display shows...
SCHEDULE screen
UP/DOWN arrows on right−hand
side of screen; EDIT changes to
CANCEL
Days change to match selected
group, e.g.
MON TUE WED THU FRI
Filled triangle above event
indicates which event is selected
for change
After change is made, SAVE
appears in the bottom right−hand
of the screen
Fan indicator displays selection
(ON, AUTO, or CIRC)
Information area displays start
time
), continue;
Days change to match selected
group, e.g.
SAT SUN
The changes are made and the
schedule screen reappears.
6
WAKE PERIOD BEGINS
5:OOAM
2
4
Figure 5. Programming days and events
Page 8
1
3
9
5
7
11