User Feature Screen And Help; Edit Programs (Schedule) - Lennox iComfort 10F81 Homeowner's Manual

User Features and Help (?) Screens
From the Home screen, touch the
The Features screen (figure 3) allows you access to edit programs, system
settings, display settings, zoning settings, alerts, reminders, service and
help (?).
FEATURES
edit
system
programs
settings
press any button for access to more features and controls
alerts
Wi-Fi
9:39 am May 23, 2012
Figure 3. Features Screen - Indoor Settings

EDIT PROGRAMS (SCHEDULE)

Touch edit programs button (see fig. 3). Figure 4 shows the EDIT
PROGRAMS screen.
Edit the "season programs" to reflect your preferences. (The Save energy
program uses high-efficiency Energy Star settings to promote energy
conservation.)
• select programs - Select a preset program; or touch and hold any
button to enable the keyboard to change program names to suit your
preferences.
• select days - Select week/weekend, individual days, all 7 days.
• time - Use up/down arrows to change time in 15 minute increments.
• cool- and heat-to - Use up/down arrows to change temperature in 1
degree increments.
• fan mode - Select on, auto, or circulate.
507342-01
button to access the Features screen.
appears if
display zoning is
zone
settings
settings
installed.
reminders service
In the example in Figure 4, the evening time has been disabled by touching
and holding the time button for that time period un time is replaced with add
setting. To re-enable, touch add setting that time period. Use the restore
button to restore defaults for the preset programs. It no additional
adjustment are made to any programs, touch "X" button to exit. If changes
are made to any programs then touch the save button and then touch X to
exit this screen and return to the FEATURES screen.
Only
EDIT PROGRAMS
select select
programs days
summer
winter
mon-fri
spring fall
sat-sun
save energy
?
change
days
custom
touch/hold
program
button to
rename
Wi-Fi
9:39 am May 23, 2012
TURN PROGRAMMING ON
If the programming is OFF, touch the system mode button (shown in figure 5,
labeled heat or cool) to open the manual settings menu. Programs is the
final selection in this menu. Select programs to display the program
settings menu. (The menu will disappear if you don't make a selection within
a few seconds). Select an option (e.g. spring/fall). The system mode button
will display the selected program (e.g. spring...program is ON).
Page 6
summer
program will follow these settings on mon-fri
time cool-to heat-to
06:00 am 78 70
85 62
08:00 am
add setting
82 62
10:00 pm
press and hold any time to enable or disable for the time period
Figure 4. EDIT PROGRAMS Screen
fan mode
AUTO
AUTO
AUTO
save
?