Replacing The Bulb In The Headlight - Husqvarna PT26 D Operator's Manual

Maintenance

Replacing the bulb in the headlight

Applies to the headlight lamp.
For information about the bulb type, see "Technical
data".
IMPORTANT INFORMATION:
When the plastic covers are removed, the unit with
warning lamps is released. Do not damage it.
1. Remove the plastic covers (41+43) surrounding
the steering wheel console.
2. Disconnect the cable (Caution! plastic hooks) and
carefully lift off the unit with warning lamps (39).
3. Remove the headlight console (34) from the
steering wheel console, 4 x screws. (If the
headlight insert is removed from its mounting
frame, the headlight must be realigned.)
4. Disconnect the electrical terminal from the bulb.
44
Headlight, parts