Studio System Operation - Hitachi S-3000W Operating Instructions Manual

Studio system operation

Connection with RU-Z2/RU-Z3 system
The camera can be connected into a system conprising an RU-Z2/Z3 camera base station and RC-Z2A / Z21A/Z3
camera control panel to enable remote operation of the camera control functions. The camera and RU-Z2/RC-Z3
can be separated by up to 300 meters, while a 5-inch viewfinder can be used in place of the 1.5-inchi viewfinder.
Microphone holder
MH-Z3
Microphone ME-66
MC-Z3
Microphone MC-Z2
Microphone cable
C-300MA
1.5-inch view finder
GM-9
Zoom lens
Lens cable kit
Refer to the RU-Z2/Z3 Camera Base Station and RC-Z2A/Z21A/Z3 operation manual for detaild operating
instructions.
ROU adaptor unit
When connecting the RU-Z2/RU-Z3, install the RU-
Z2/Z3 accessory ROU adaptor unit in CA-Z32
camera adaptor as indicated in the figure.
Note: The unit is not interchangeable with the ROU-
ADP2 for the CA-Z31.
5-inch view finder
GM-51
Camera adaptor
CA-Z32
Camera head
SET UP CARD
Tripod adaptor
TA-Z3
View finder adaptor
AT-30
Camera cable
C-152KAB
C-502KAB
C-103KAB
Headset
Extention adaptor
EA-Z3
Power select switch setting
Set the power select switch to CCU / VTR.
66
Junction unit
JU-Z2
Camera base station
Camera control panel
RU-Z2 / RU-Z3
RC-Z2A/RC-Z21A/RC-Z3
Battery mount
(for ANTON BAUER)
QR DP800
AC adaptor
Personal computer
Battery mount
(for NP-1 series)
Battery mount
(for BP-90)