Facility Names And Functions - Hitachi S-3000W Operating Instructions Manual

Facility names and functions

1 Viewfinder connector
Connect the accessory 1.5-inch viewfinder or the
separately sold GM-51 5-inch viewfinder.
2 Viewfinder horizontal lock lever
Secures the side to side position adjustment of
the 1.5-inch viewfinder.
3 Viewfinder front to rear lock screw
Secures the front to rear position adjustment of
the 1.5-inch viewfinder
4 CC/ND filter select knob
Selects filter to match the light source of the
scene.
5 Lens mount
Bayonet type lens mount.
6 Shoulder belt hook
Attachment for separately sold shoulder belt.
7 Talk on/off switch
Intercom microphone on/off when connected into
a system with the RU-Z2/RU-Z1.
8 IIntercom level control
Intercom sound level (volume) adjustment when
connected into a system with the RU-Z2/RU-Z1.
9 Power select switch
[BATT-CCU/VTR-EXT]
BATT : When power is supplied via the
BATT12V IN connector.
CCU/VTR : When power is supplied via the
connector for camera base station
or VTR.
EXT : When power is supplied via the DC
IN connector.
10 Setup card slot
Slot for inserting setup card.
11 Shoulder pad
Adjustable shoulder pad for comfortable
operation. Loosen the 2 screws and adjust the
front to rear position.
6