Scene File - Hitachi S-3000W Operating Instructions Manual

Scene file

When taking scenes having different conditions, the settings need to be optimized for each scene. The scene file
function enables setting the conditions for each scene beforehand and storing them in memory for instant recall at
the required time. The 4 scene files can be used for storing 4 sets of scene conditions.
Setting steps
1. Select the file number with the Scene File switch
(adjust camera to the status previously stored in the memory).
2. Set the file storage items
(if changing the memory contents).
a Set the Function 1 page items from the setting menu.
(See page 45.)
b Operate auto white balance and store the adjustment in memory
(one memory is provided for each of the 4 filters).
(See page 39.)
c Set the shutter and store the setting in memory.
(See page 41.)
Note) Data are stored in the selected file simultaneously with setting.
File storage items
Item
Type
CONTRAST
AUTO IRIS
GAIN LOW
2a GAIN MID
GAIN HIGH
MASKING
GAMMA
DTL LEVEL
DTL FREQ
FLESH TONE GAIN
FLESH TONE PHASE
FLESH TONE WIDTH
2b White balance data
(each filter)
2c SHUTTER SELECT
42
Details
OFF, NORM,
HIGH
AVERAGE, PEAK
-3,0dB
+6,+9,+12dB
+12,+18,+24dB
OFF, PRESET,
MEMORY
OFF, PRESET,
MEMORY
OFF,-128,....+127
SOFT,
STANDARD,
SHARP
-128,....+127
-128,....+127
-128,....+127
(Remote mode)
1/100,1/250,...
Var, AES, CC FRM