Hitachi S-3000W Operating Instructions Manual page 80

Studio system operation
Auto setting with RU-Z3 / RU-Z2 / RU-Z1 (plug & play)s
No System
RU-Z1
1
RU-Z2 /RC-Z3
2
(TU-Z3 system)
(COMP TRIAX)
TU-Z2
3 inner module
via IM-Z3B
Self-contained
inner module operation
4
M-Z3B
(Betacam)
M-Z3P
(DVCPRO)
IM-Z3S
(BetaPRO)
IM-Z3J
(Digital-S)
Self-contained
Camera adapter operation
5 CA-Z31/32
(portable VTR)
Notes:
1. When RU-Z1/Z2/Z3 (RC-Z1/Z2A/Z3) remote control is off, although settings can be changed at the camera head full menu,
the I nitial settings are returned at resupply of power.
2. When RU-Z1/Z2/Z3 (RC-Z1/Z2A/Z3) remote control is off, settings can be changed at the camera head full menu.
Settings
are stored as common setting values in the RU-Z1/Z2/Z3 (RC-Z1/Z2A/Z3) memory.
3. With RU-Z1/Z2A, Alarm Set is fixed at 11.0 V.
4. When Auto is indicated, settings are automatic at the inner module.
RU-Z2(RU-Z1)RGB connector signal output
The signals indicated in the table can be selected for output
from the RU-Z2(RU-Z1)RGB connector.
1. Set the RC-Z2A / Z21A/Z3(RC-Z1 / Z11) remote
control switch to off. Control shifts from the RC to
the camera.
2. Select the SYSTEM sub-menu from the Function
menu, then select the output signal at the VIDEO
<VTR> item.
Note: When the RBG connector output is other than
RGB, the RU-Z2 waveform monitor (WFM OUT)
display does not operate correctly.
Baud rate
62.5K( 1) -20db( 1)
9600( 1)
9600( 1)
9600( 1)
62. 5K,
AUTO( 4)
9600
62.5K -60dB
9600 -20dB
69
Audio level Video output
RGB
COMP100
COMP75
YC,
VBS
COMP100
( 1)
RGB( 1)
AUTO( 4)
COMP100,
COMP75,
YC,
VBS,
RGB
connector
RGB Component
R R
G G
B B
Battery type
12. 0V( 1)
( 3)
( 2)
12. 0V
13. 2V
14.4V
Output signal
Y / C VBS
R-Y C
Y Y VBS
B-Y