Printout Is Garbled Or Incorrect With Parallel Connection; Cannot Print - Oki C7350 Series User Manual

POSSIBLE CAUSE
USB cable is disconnected or
faulty.
A USB hub is being used.
P
RINTOUT IS GARBLED OR INCORRECT WITH PARALLEL CONNECTION
POSSIBLE CAUSE
Possible mismatch on parallel
connection between
computer and printer.
C
ANNOT PRINT
LPT write error displayed.
PRNUSBx write error is displayed.
POSSIBLE CAUSE
Interface is disabled.
Printer is switched OFF.
Printer interface cable is
disconnected.
A converter, buffer, extension
cable or USB hub is being
used.
Printer driver output port is
incorrect.
Printer is not selected in the
printer driver.
Incorrect printer driver is
being used.
REMEDY
Reconnect or try another cable.
Test by connecting the printer and computer
directly.
REMEDY
Change parallel transmission mode (see
Parallel Transmission Mode above).
REMEDY
In the printer menu settings, enable Parallel or
USB interface.
Switch ON.
Reconnect the printer interface cable.
Test by connecting the printer and computer
directly.
Set correct output port to which the printer
interface cable is connected.
Select the printer or set to default printer.
Delete this printer driver and install correct
printer driver.
C7350 User's Guide> 159