In The Fuser Unit - Oki C7350 Series User Manual

I
N THE FUSER UNIT
If there is any paper jammed in the fuser unit, carry out the
following:
The fuser unit is very hot after printing. Always use the
handle when lifting it.
(a) Move the two coloured locking levers (1) either side
of the fuser unit toward the rear of the machine
(they are spring loaded toward the front).
(1)
(b) Remove the fuser unit, holding the unit by the
handle, and place it on a flat table.
WARNING!
C7350 User's Guide> 151
(1)