Pacific hydrostar 95619 Assembly And Operating Instructions Manual page 3

4. Burn Hazard. The engine and high pressure pump become hot during
operation. Do not touch the engine or pump until they have cooled down
after use.
5. Keep work area clean
6. Observe work area conditions
locations. Don't expose to rain. Keep work area well lit.
7. Keep children away
them handle machines, tools, gasoline or oil.
8. Store idle equipment
inhibit rust. Always lock up tools and keep out of reach of children.
9. use the right tool for the job
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
10. Dress properly
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
11. use eye and ear protection
heavy rubber boots, work gloves and hearing protection during use. During pressure
washing debris can fly back in your face, or into other property, people or animals.
Use extreme caution to prevent unintended spray injury.
12. Do not overreach
or across running machines.
13. maintain tools with care
formance. Follow instructions for lubricating and changing accessories. Inspect tool
hoses periodically and, if damaged, have them repaired by an qualified technician.
The handles must be kept clean, dry, and free from oil and grease at all times.
14. Turn OFF power
15. Remove adjusting keys and wrenches
are removed from the tool or machine work surface before turning engine on.
16. avoid unintentional starting
not in use. Do not carry the spray handle with your finger on the trigger, whether or
not engine is operating.
17. Stay alert . Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
18. Take caution as some woods contain preservatives such as copper chromium
arsenate (CCa) which can be toxic. When high pressure spraying extra care
should be taken to avoid inhalation and minimize skin contact.
SKU 95619 For technical questions please call 1-800-444-3353
. Cluttered areas invite injuries.
. Do not use machines or power tools in unsafe
. Children must never be allowed in the work area. Do not let
. When not in use, tools must be stored in a dry location to
. Do not attempt to force a small tool or attachment to
. Do not wear loose clothing or jewelry as they can be caught in
. Always wear ANSI approved impact safety goggles,
. Keep proper footing and balance at all times. Do not reach over
. Keep tools maintained and clean for better and safer per-
. Turn OFF engine and water supply when not in use.
. Be sure the water supply is in the Off position when
. Check that keys and adjusting wrenches
Page 3