How To Set A New Default; How To Reset To Factory Settings - Brother MFC-J6510DW Advanced User's Manual

Chapter 8
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
PHOTO CAPTURE is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.

How to set a new default

You can save the Scan to Media settings
(Quality, File Type, Glass ScanSize
and Auto Crop) you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press (SCAN).
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Set New Default. Press OK and 1 to
choose Yes.
d
Press Stop/Exit.
56
How to reset to factory
settings
You can restore all the Scan to Media settings
(Quality, File Type, Glass ScanSize
and Auto Crop), that you have changed, to
the factory settings.
a
Press
8
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Factory Reset. Press OK and 1 to
choose Yes.
d
Press Stop/Exit.
(SCAN).
8