Brother MFC-J6510DW Advanced User's Manual page 52

Hide thumbs Also See for MFC-J6510DW:
Table of Contents

Advertisement

Chapter 8
e
Do one of the following:
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually.
Press OK when you have finished.
f
Enter the number of copies you want
using the dial pad.
g
Do one of the following:
Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
If you do not want to change any
settings, press Colour Start to print.
Enhance Scenery
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Scenery.
Press OK.
e
Do one of the following:
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually.
Press OK when you have finished.
46
f
Enter the number of copies you want
using the dial pad.
g
Do one of the following:
Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
If you do not want to change any
settings, press Colour Start to print.
Remove Red-Eye
The machine detects eyes in your photos and
will attempt to remove red-eye from your
photo.
Note
There are some cases when red-eye may
not be removed.
8
• When the face is too small in the image.
• When the face is turning too far up,
down, left or right.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.
(PHOTO CAPTURE).
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j6710dw

Table of Contents