How To Set A New Default; How To Reset To The Factory Default - Brother MFC-J825DW Advanced User's Manual

• The ADF must be empty to use the
Auto Crop.
• The Auto Crop feature is available for up
to a maximum of 16 documents
depending on the size of your documents.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while the status
LED is blinking to avoid damaging the
card, USB Flash memory drive or the data
stored on them.

How to set a new default

You can save the Scan to Media settings
(Quality, File Type and Auto Crop)
you use most often by setting them as the
default settings. These settings will stay until
you change them again.
a
Press (SCAN).
b
Press d or c to display to Media.
c
Press to Media.
d
Press d or c to display
Set New Default.
e
Press Set New Default.
f
Press Yes to confirm.
g
Press Stop/Exit.
Printing photos from a memory card or USB Flash memory drive
How to reset to the factory
default
You can restore all the Scan to Media settings
that you have recently changed, (Quality,
File Type and Auto Crop), back to the
factory default.
a
Press
b
Press d or c to display to Media.
c
Press to Media.
d
Press d or c to choose
Factory Reset.
8
e
Press Factory Reset.
f
Press Yes to confirm.
g
Press Stop/Exit.
(SCAN).
8
8
49