Receiving A Fax; Memory Receive (Monochrome Only); Out Of Paper Reception; Fax Forwarding - Brother MFC-J6510DW Advanced User's Manual

Hide thumbs Also See for MFC-J6510DW:
Table of Contents

Advertisement

4

Receiving a fax

Memory Receive
(Monochrome only)
You can only use one Memory Receive
operation at a time:

Fax Forwarding

Fax Storage
PC-Fax Receive
Off
You can change your selection at any time. If
received faxes are still in the machine's
memory when you change the Memory
Receive operation, a message will appear on
the LCD. (See Changing Memory Receive
operations on page 18.)

Out of Paper Reception

As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed. Put some paper in the
paper tray. (See Loading paper and other
print media in chapter 2 of the Basic User's
Guide.)
If you don't put paper in the paper tray, the
machine will carry on receiving the fax, with
the remaining pages being stored in memory,
if enough memory is available.
Further incoming faxes will also be stored in
memory until the memory is full. To print the
faxes, put fresh paper in the tray. When the
memory is full the machine will stop
automatically answering calls.
Fax Forwarding
When you choose Fax Forward, your
4
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
Memory Receive.
Press OK.
e
4
Press a or b to choose Fax Forward.
Press OK.
f
Enter the forwarding number (up to
20 digits).
Press OK.
g
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
IMPORTANT
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• When you receive a colour fax, your
machine prints the colour fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
h
Press Stop/Exit.
4
4
4
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j6710dw

Table of Contents