Scan To A Memory Card; How To Set A New Default; How To Reset To Factory Settings - Brother DCP-J125 Advanced User's Manual

Scan to a memory card

How to set a new default

You can save the Scan to Media settings
(Quality and File Type) you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press (SCAN).
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Set New Default.
Press OK.
d
Press + to choose Yes.
e
Press Stop/Exit.
How to reset to factory
settings
You can restore the Scan to Media settings
(Quality and File Type), that you have
changed, to the factory settings.
a
Press (SCAN).
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Factory Reset.
Press OK.
d
Press + to choose Yes.
e
Press Stop/Exit.
Printing photos from a memory card
4
4
4
4
15