Table of Contents
Advertisement
1. Recoil Starter Grip
IMPORTANT INFORMATION
Do not let recoil cord snap back by itself.
This may damage the cord or the recoil
starter assembly.
Pull the recoil starter grip slowly until you feel
compression, then pull it briskly.
Normally this engine will not backfire. If you
get backfires, contact your Husqvarna dealer
for service.
2. Ignition Switch
The ignition key switch is placed on the
control panel.
CONTROLS
Recoil starter grip
Ignition key
8011-476
8011-475
15
English-
Advertisement
Table of Contents
