Maintenance; Maintenance Schedule - Husqvarna WG4815E, WG3613E Operator's Manual

Walk-behind mower
Hide thumbs Also See for WG4815E, WG3613E:
Table of Contents

Advertisement

Maintenance

Maintenance Schedule

The following is a list of maintenance procedures that must be performed on the machine. For those points
not described in this manual, visit an authorized service workshop. An annual service carried out by an
authorized service workshop is recommended in order to maintain your machine in the best possible
condition and to ensure safe operation.
Read Safety Instructions section "Maintenance" on page 10.
= Described in this manual
= Not described in this manual
Maintenance
Check for fuel and oil leakages
Check the parking brake
Check the engine's oil level (every refueling)
Front and rear tires
Check the fuel pump's air filter
Check the safety system
Check/clean the engine's cooling air intake
Check the cutting deck
Check underside of rear deck
Check hardware (screws, nuts, etc.)
Start the engine and blades, listen for unusual
sounds
Clean under the mower deck
Inspect/Replace blades
Check the condition of belts, belt pulleys, etc.
Check for damage
Check the tire pressures
Thoroughly clean around the engine
Clean around belts, belt pulleys, etc.
34
English-
MAINTENANCE
2)
Daily
Weekly
mainte-
mainte-
nance
nance
Page Before After
-
41
47
40
40
37
38
42
42
43
-
43
44
41
-
40
-
-
At
Maintenance interval
least
in hours
once
each
25
50
100
300
year

Advertisement

Table of Contents
loading

Table of Contents