Table of Contents
Advertisement
Attention:
Use the vacuum tool provided with the replacement part to
remove the microprocessor. Dropping the microprocessor during removal can
damage the contacts. Also, contaminants on the microprocessor contacts, such
as oil from your skin, can cause connection failures between the contacts and
the socket.
10. Remove the microprocessor using the vacuum tool and the following
procedure:
a. Squeeze and hold the bladder of the tool; then, place the suction cup on
the microprocessor and release the bladder.
Vacuum tool
Microprocessor
Socket
b. Using the tool, carefully lift the microprocessor straight up and out of the
socket, and place it on a static-protective surface.
c. Squeeze the bladder of the tool to release the microprocessor from the
suction cup.
Chapter 5. Field replaceable units
71
Advertisement
Table of Contents
Troubleshooting
