Expansion Memory - Toshiba Satellite P30 Maintenance Manual

4.8

Expansion Memory

Removing the Expansion Memory
To remove the memory module, make sure the computer is in boot mode then:
1. Be sure the power is off and all cables are disconnected from the computer.
2. Turn the computer upside down and remove the battery and loosen the three embedded
M2.5x6 screws securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will force one end of the
module up.
5. Grasp the module and pull it out.
6. Seat the cover and secure its screws.
7. Replace the battery.
CAUTION: Do not touch the connectors on the expansion memory or on the
computer. Debris on the connectors may cause memory access problems.
Satellite P30 Series Maintenance Manual
Figure 4-11 Removing the expansion memory
4 Replacement Procedures
4-17