Optical Drive - Toshiba Satellite P30 Maintenance Manual

4.6

Optical Drive

This computer may be fitted with a:
Disassembling the Optical Drive
To disassemble the optical drive, then follow the steps below.
1. Remove one M2.5x5 screw and slide the optical drive module from the bay.
2. Remove two M2x3 screws from the bracket plate. Remove the bracket plate.
Reassembling the Optical Drive
To reassemble an optical drive, follow the steps below and refer to the figure in the preceding
section.
1. Position the optical drive bracket plate to the rear panel of optical drive.
2. Secure the optical drive bracket plate with two black M2×3 screws.
3. Install the optical drive module into the bay and secure with one M2.5x5 screw.
Satellite P30 Series Maintenance Manual
CD-RW/DVD-ROM device
DVD-ROM device
DVD-R/-RW device
DVD+-R/+-RW
DVD Super Multi device
Figure 4-8 Removing the optical drive bracket
4 Replacement Procedures
4-13