Installing The Keyboard - Toshiba Satellite P30 Maintenance Manual

4 Replacement Procedures
Figure 4-16 Disconnecting the keyboard cable

Installing the Keyboard

To install the keyboard, follow the steps below and refer to the figures in the preceding section.
1. Connect the keyboard cable to the system board.
2. Set the keyboard in place and secure it with two M2.5x3 black screws.
3. Engage the flip latch with either a screwdriver or a fingernail.
4. Set the strip cover and press down to secure the strip cover latches engage.
4-22 Satellite P30 Series Maintenance Manual