Touch Pad - Toshiba Satellite P30 Maintenance Manual

4.13 Touch Pad

Removing the Cover
To remove the Touch Pad, first remove the top cover, then follow the steps below:
1. Remove the two black M2.5x3 screws securing Touch Pad LED board FFC cable to the
Touch Pad, and then detach it.
Note: One screw is under the mylar flap.
2. Remove one M2.5x3 screw securing the Touch Pad Bracket and then slide it out.
Satellite P30 Series Maintenance Manual
Figure 4-24 Removing the Touch Pad LED board
4 Replacement Procedures
4-31