Fl Inverter Board - Toshiba Satellite P30 Maintenance Manual

4 Replacement Procedures
5. Remove the LCD module.
NOTE: If the LCD module malfunctions, remove the LCD cable and LCD bracket.
Then replace the whole LCD module unit.
Installing the LCD Module
To install the LCD module, follow the steps below and refer to the figures in the preceding
section.
1. Set the LCD module in the display assembly.
2. Secure the LCD module bracket to the LCD module eight M2x3 screws.
3. Secure the LCD module bracket to LCD cover with six black M2.5x5 screws.
4. Connect the LCD cable to the FL inverter board.
5. Secure the FL inverter board with one black M2x3 screw and the LCD cable with one black
M2.5x3 screw.
4-42
Figure 4-35 Removing the LCD module-2
Satellite P30 Series Maintenance Manual