Clock & Automatic Timer Operation - Hotpoint Creda H250E Instructions Manual

Clock & Automatic Oven Timer Operation
TO SET & RE-SET THE TIME OF DAY
Step 1 Make sure all oven controls are turned Off.
Step 2 Check the electricity supply to the cooker is switched on.
Step 3 Push and turn knob (B) anti-clockwise until the correct time of day
Note:
TO SET THE TIMER FOR MANUAL OVEN OPERATION
Step 1 Turn knob (B) anti-clockwise until the
is shown.
For normal "Manual" operation of the oven(s) the timer
should always be set at
shown). See Below.
Note: Unless you set the timer for an Auto Cooking
Programme, for normal "Manual" operation of the oven(s) the
timer should always be set to the
If the symbol does not appear in the display window :-
the display window.
, the position in the display window (as
position.
symbol does appear in
17