Timer (Electric Oven),10 - Hotpoint EG 900 X S Operating Instructions Manual

Timer (Electric oven)
GB
The programmer makes it possible to preset the oven and the grill in terms of:
• delay start with a preset length of time for cooking;
• immediate start with a preset length of time for cooking;
• timer.
Button functions:
: Timer with hour and minutes;
: Length of cooking time;
: End cooking time;
: Manual change;
: Change time (backwards);
: Change time (forwards).
How to Reset the Digital Clock
After the appliance has been connected to the power source or following a
power outage, the clock display will begin to blink and read: 0:00
• Press the buttons at the same time. Then use (within 4 seconds)
the and buttons to set the exact time.
Use the button to move the time forwards.
Use the button to move the time backwards.
The time can also be changed in the following two ways:
1. Repeat all of the foregoing steps.
2. Press the button, and then use the and buttons to reset the
time.
Manual Operation Mode for the Oven
After the time has been set, the programmer is automatically set to manual
mode.
Note: Press the
every "Automatic" cooking session.
Delayed Start Time with Preset Cooking Length
The length and the end cooking times must be set. Let us suppose that the
display shows 10:00.
1. Turn the oven control knob to the cooking setting and temperature desired
(example: convection oven at 200°C).
2. Press the and the use (within 4 seconds) the
set the length of the cooking time. Let us suppose that 30 minutes was
set for the length of the cooking time. In this case, the display will show:
Release the button, and within 4 seconds, the current time will reappear with
the symbol and "auto."
3. Press the button, and then use the
cooking time. Let us suppose that it is 13:00
4. Release the button and the display will show the current time within 4
seconds:
When "auto" is lighted, it indicates that the length and end cooking time
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
10
button to return the oven to manual mode after
and
and buttons to set the end
have been preset to operate in automatic mode. At this point, the oven will
turn on automatically at 12:30 in order to finish the cooking session within 30
minutes. When the oven is on, the
the display for the entire length of the cooking process. The
be pressed at any time to display the setting for the length of the cooking
time, while the button can be pressed to display the end cooking time.
At the end of the cooking time, an acoustic signal will sound. Press any
button it turn it off (except the
Immediate Start Time with Preset Cooking Length
When only the length of the cooking time is set (points 1 and 2 of the paragraph
entitled, "Delayed Start Time with Preset Cooking Length"), the cooking
session starts immediately.
Cancelling a Preset Cooking Time
Press the button, and use the
Then press the manual cooking mode button
Timer Feature
The timer can be used to count down from a given length of time. This feature
does not control when the oven comes on or turns off, but, rather, it only emits
an acoustic signal when the preset time has run out.
Press the button, and the display will read:
Then use the and
Release the button, and the timer will start at that second. The display will
show the current time.
At the end of the preset time, an acoustic signal will sound, which can be
turned off by pressing any button (except the
buttons to
symbol will turn off.
Changing and Cancelling Settings
• The settings can be changed at any time by pressing the corresponding
button and using the
• When the length setting for the cooking time is cancelled, the end cooking
time setting is also cancelled, and vice versa.
• When in automatic cooking mode, the appliance will not accept end cooking
times prior to the start cooking time proposed by the appliance itself.
Buzzer volume control
Once you have made and confirmed the clock settings, use button to adjust
the volume of the alarm buzzer.
symbol (cooking pot) will appear on
and buttons).
button to set the time to:
.
buttons to set the desired time.
and buttons), and the
or button.
button can