O
PERATION
Indicator
Description
The UPS is drawing utility power and performing double conversion to supply
Online
power to connected equipment (see Troubleshooting).
The UPS is supplying battery power to the connected equipment.
On Battery
The UPS is in bypass mode, sending utility power directly to connected equipment.
Bypass
Bypass mode operation is the result of an internal UPS fault, an overload condition
or a user initiated command either through an accessory or the manual bypass
switch. Battery operation is not available while the UPS is in bypass mode (see
Troubleshooting).
The UPS detects an internal fault (see Troubleshooting).
Fault
The connected loads are drawing more power than the UPS power rating (see
Overload
Troubleshooting).
The battery is disconnected or must be replaced (see Troubleshooting).
Replace
Battery
Feature
Function
Press this button to turn on the UPS. (Read on for additional capabilities.)
Power On
Press this button to turn off the UPS.
Power Off
Feature
Normal /Bypass
F
RONT
Function
Manually switch connected equipment to bypass mode, so that utility power is
sent directly to connected equipment. Battery operation is not available while
the UPS is in bypass mode. (See Troubleshooting.)
D
P
ISPLAY
ANEL
6