Disconnect the power-adapter port cable from the connector on the system board.
3
Lift the power-adapter port off the computer base.
4
1 power-adapter port cable
3 power-adapter port
Replacing the Power-Adapter Port
Procedure
Place the power-adapter port in the slot on the computer base.
1
Connect the power-adapter port cable to the connector on the system board.
2
Align the screw holes on the power-adapter port bracket with the screw holes on
3
the computer base.
Replace the screws that secure the power-adapter port bracket to the computer
4
base.
Postrequisites
Replace the palm rest. See "Replacing the Palm Rest" on page 31.
1
Replace the base cover. See "Replacing the Base Cover" on page 18.
2
Replace the keyboard. See "Replacing the Keyboard" on page 16.
3
Replace the battery. See "Replacing the Battery" on page 13.
4
Follow the instructions in "After Working Inside Your Computer" on page 9.
5
34
|
Power-Adapter Port
2 system-board connector
1
2
3