Procedure
Disconnect the antenna cables from the connectors on the Mini-Card.
1
Peel the tape that secures the display cable to the system board and then
2
disconnect the display cable from the connector on the system board.
Make a note of the display cable routing and remove the cable from the routing
3
guides.
Remove the screws that secure the display assembly to the computer base.
4
5
Lift the display assembly off the computer base.
1
2
1 display assembly
3 tape
5 antenna cables (2)
36
|
Display Assembly
2 screws (6)
4 display cable
5
4
3