Carefully pry the optical-drive bezel and remove it from the optical-drive assembly.
3
Remove the screws that secure the optical-drive bracket to the optical drive.
4
Remove the optical-drive bracket.
5
1
optical-drive bezel
3
optical-drive bracket
Replacing the Optical Drive
Procedure
Align the screw holes on the optical-drive bracket with the screw holes on the
1
optical drive.
Replace the screws that secure the optical-drive bracket to the optical drive.
2
Align the tabs on the optical-drive bezel with the slots on the optical-drive
3
assembly and snap the optical-drive bezel into place.
Slide the optical-drive assembly into the optical-drive bay until it is fully seated.
4
5
Replace the screw that secures the optical-drive assembly to the computer base.
Postrequisites
Replace the base cover. See "Replacing the Base Cover" on page 18.
1
Replace the battery. See "Replacing the Battery" on page 13.
2
Follow the instructions in "After Working Inside Your Computer" on page 9.
3
26
|
Optical Drive
2
1
3
2
optical drive
4
screws (2)
4