Connection Guide - Swann ads 440 Instruction Manual

Connection Guide

To install the camera, connect it to your router or network switch/hub using the included
Ethernet cable. The camera is also Wi-Fi capable - but because this is the first time you're
setting it up, we recommend physically connecting it to your home network through the
Ethernet cable and configuring it properly before you go wireless.
2
Connect the power supply to
the camera's DC In port and
plug the power adapter to an
electrical outlet.
4
Make sure the computer that you
want to use to configure and/or
access the camera is connected to the
same router.
1
Screw the Wi-Fi antenna
onto the Gold connector on
the back of the camera.
3
Connect the camera's
Network port to any
available port on your
wireless router using the
supplied Ethernet cable.
4