Continuous Bar Code Read; Unique Bar Code Reporting - Motorola DS9208-1D Product Reference Manual

4 - 22 DS9208-1D Product Reference Guide

Continuous Bar Code Read

Parameter # F1h 89h
Enable this to report every bar code while the trigger is pressed.
NOTE Motorola strongly recommends enabling
cause accidental decodes when more than one bar code is in the imaging engine's field of view.
*
Disable Continuous Bar Code Read

Unique Bar Code Reporting

Parameter # F1h D3h
Enable this to report only unique bar codes while the trigger is pressed. This option only applies when
Continuous Bar Code Read
*
Disable Continuous Bar Code Read Uniqueness
(00h)
is enabled.
(00h)
Picklist Mode with this feature. Disabling Picklist Mode can
Enable Continuous Bar Code Read
Enable Continuous Bar Code Read Uniqueness
(01h)
(01h)